Sam4s SER-7040 - Macro 1-40; Mdse Return

86
x
P-Mode Programming SER-7000 Program Manual
Macro 1-40
Each Macro can execute up to 50 keystrokes.
MACRO KEY# 1 PROGRAMMING ALPHA
DESCRIPTOR MACRO1
ACTIVE IN X ONLY? N
-- ----------------
01 [DONE]
02 [C LEFT]
03
ESC ENT PAGE UP/DN
np FUNC. KEY
1. Press keys to be
recorded in the macro
sequence.
2. Press the PAGE UP
or PAGE DN keys to
view the entire
macro, if necessary.
3. Press ESC to exit the
function key
program.
Mdse Return
FUNC. KEY #118 PROGRAMMING
DEFAULT DESC : MDSE RETURN
DESCRIPTOR : MDSE RETURN
HALO (0=NO LIMIT) 00000.00
ACTIVE IN X ONLY N
COMPULSORY VALIDATION N
ADD TO NET GRAND TOTAL N
ESC Y/N ENTER PAGE UP/DN
npom
FUNC. KEY #118 PROGRAMMING
SKIP ADJUSTMENT OF PLU TOTAL N
RETURN CURRENT PRC LEVEL ONLY N

ESC Y/N ENTER PAGE UP/DN
npom