Sam4s SER-7040 - Page 128

122
x
P-Mode Programming SER-7000 Program Manual
GENERAL PRINTING OPTIONS
21.PRINT RECEIPT AUTOMATICALLY N
22.PRT RCPT AFT TIME CLK EDIT Y
23.PRINT GROUP NAME WHEN
PRINTING ITEMS BY GROUP N
24.PRT GUEST CHK PRT CNT ON GC N
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL PRINTING OPTIONS
25.PRINT IN DOUBLE
TOTAL N
TENDER N
CHANGE N
ORDER # N
26.PRT RCPT AUTOMATIC. IN VOID N
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL PRINTING OPTIONS
27.PRT # OF ITEMS ON RECEIPT N
28.ALLOW MULTIPLE RECEIPTS Y
29.ITEMS ON RCPT IS # OF ITEMS
PRINTED ONLY N
30.PRINT TIP ON EFT RECEIPT N
31.COPY OF LANTRAN RECEIPT 01
! ESC Y/N ENTER PAGE UP/DN
npom
GENERAL PRINTING OPTIONS
32.TURN OFF AUTO CUTTER N
33.PRE LOGO IMAGE ON RCT(0-22 0
34.POST LOGO IMAGE ON RCT(0-22)0
35.PRE LOGO IMAGE ON GC(0-22) 0
36.POST LOGO IMAGE ON GC(0-22) 0

ESC Y/N ENTER PAGE UP/DN
npom
General Printing Options Program Notes
# FIELD Notes
1 PRINT ON RECEIPT:
Determine the content of each receipt by
selecting Y or N for each item.
2 RCPT FEED LINES AFTER
PRT
Enter the number of lines you wish to feed
after each receipt is printed. (Makes chit
larger.)