Sam4s SER-7040 - Page 207

SER-7000 Program Manual P-Mode Programming
x
201
NON-PLU# 1 (PLU#02˜ ) PROGRA
LENGTH OF FIELD 1(=PLU CODE) 0
LENGTH OF FIELD 2 0
CONTENT OF FIELD 2 PRICE

USE PRICE CHECK DIGIT? N
TAB OR DEC. POINT OF FIELD 2 0
ESC Y/N ENTER PAGE UP/DN
npom
3. The NON-PLU#
PROGRAMMING
screen displays for
the identifier you
have chosen to
program.
4. Use the table below
as a reference in
filling the fields of
this screen.
5. Press ESC to return
to the NON-CODE
PLU
PROGRAMMING
screen.
NON-PLU Code Program Notes
FIELD Notes
LENGTH OF FIELD 1
Assign the length of the product code field. (The
length of field 1 plus field 2 must equal 10.)
LENGTH OF FIELD 2
Assign the length of the price/weight/quantity field.
(The length of field 1 plus field 2 must equal 10.)
CONTENT OF FIELD 2
Select the type of content for field 2: price, weight or
quantity.
USE PRICE CHECK DIGIT
Select “Y” if the price field includes a check digit.
TAB OR DECIMAL POINT
OF FIELD 2
Enter the decimal point position for the
price/weight/quantity field.