Samson TROVIS 5575 - Presetting Room and DHW Temperature Set Points

1.9 Presetting room and DHW temperature set points
For the heating circuits, the desired room temperatures during the day ( Day set point ) and
during the night (
Night set point ) can be preset.
In the DHW circuit, the temperature you wish the DHW to be heated to can be adjusted.
The temperature set points for the different control circuits are adjusted at the rotary switches
one after the other:
Desired temperature set point Switch Position
Heating circuit 1*: Day set point Top
Heating circuit 1*: Night set point Top
Heating circuit 2*: Day set point Middle
Heating circuit 2*: Night set point Middle
DHW circuit*: DHW temperature set point Bottom
* Refer to page 121 for assignment
Parameter
WE Rotary switch / Range of values
Day set point 20 °C Top, middle / 0 to 40 °C
Night set point 15 °C Top, middle / 0 to 40 °C
DHW temperature set point 55 °C Bottom / Min. to max. DHW temperature
Proceed as follows:
Turn appropriate rotary switch to “Set point temperature“.
Display shows: temperature value
q
Change temperature value.
Return the rotary switch to the desired operating mode (left side).
20 EB 5575 EN
Operation