Samsung Electronics 112
Disassembly and Reassembly
■
Check point at compressor replacement
1) Check oil color of broken compressor.
- If one compressor is broken, you are not sure another compressor should be replaced together or not.
At that time, check oil color of broken compressor comparing with below photo.
2) Weight of compressor and quantity of oil
- When compressor is shipped at factory, oil of (compressor unit standard) 1100cc was lled up.
- Weight of compressor including oil GB046FA* :
24.3 kg, GB052FA* : 31.6 kg, GB066FA* : 35.4 kg, GB070FA* : 36.7 kg, DS4GJ5080FVA* : 40.9 kg
- Add oil to outdoor unit as much as relevant weight if is heavy than weight of compressor that weight of compressor that is
changed to locality is changed newly.
- Quantity(kg) of added oil = Weight(kg) of compressor that broke down - Weight(kg) of newly change compressor
- If quantity of calculated addition oil passes over 1kg, quantity of add oil does by 1kg.
- Problem of that is blocked in oil circulation of (remaining oil of compressor that broke down below 0.3kg) compressor if is light
more than 0.8kg than weight of compressor that weight of compressor that is changed to locality is changed newly inspects oil
circulating system because possibility occurred is high.
▶ Change to compressor that is beside.
3-2 Disassembly and Reassembly (cont.)
3-2-7
Compressor exchange order
(cont.)
To Next Page
Loading...
Need help?
General
