Disassembly and Reassembly
Samsung Electronics 127
No. Work Procedure Remark
12 - To remove the Inverter PBA.
① Unfasten the five wire screws for the compressor
and reactor.
② Remove the power connector.
③ Unfasten the screws on the case of the Inverter PBA.
④ Unfasten the screws on the IPM.
DC-Reactor wire screws
Compressor wire screws
Power connector AC220V
Power connector AC380V
Inverter PBA #2
Screws on the IPM
3-2-13 Removal Instructions for the Inverter PBA
3-2 Disassembly and Reassembly (cont.)
To Next Page
Loading...
