Disassembly and Reassembly
Samsung Electronics 113
No. Work Procedure Remark
7 - To remove the Accumulator, first make sure that all
the pipes in front of the Accumulator have been removed
toprevent interference.
- The Accumulator is located in the rear of the device as
shown in the image. Be sure to remove all the pipes
before the Accumulator so that the Accumulator, after
being detached, can be moved in front of the device.
- Use a torch to heat and separate the welded joints indi-
cated by ⓐ , ⓑ and ⓒ on the three pipes in the image.
Accumulator
ⓐ
ⓒ
ⓑ
3-2 Disassembly and Reassembly (cont.)
3-2-8 Removal Instructions for the Accumulator
To Next Page
Loading...
