Samsung Electronics 98
Disassembly and Reassembly
No. Work Procedure Remark
3 Unfasten the four screws on the Control Box cover.
The Control Box cover does not fall off the device even
when the screws are unfastened, due to the supportive
tab at the top.
As shown in the image, pull the upper part of the cover
while holding the lower part and remove the cover from
the supportive tab.
Then pull down the cover to remove it.
- The power connection box is attached to the lower part
of the Control Box.
- The power connection box is protected by the metal
cover to ensure safety.
②
①
Supportive tab
Power connection box
3-2 Disassembly and Reassembly (cont.)
3-2-3 Disconnecting the Power Supply (cont.)
To Next Page
Loading...
Need help?
General
