Samsung Electronics 100
Disassembly and Reassembly
No. Work Procedure Remark
3 Remove the (transparent) cover on the terminal block.
Disconnect the power cables on the input side of
the terminal block.
The power cables are fixed with screws on the terminal
block. Use a spanner or hex wrench to disconnect the
power cables. Use insulation tape to wrap each power
cable before storage to prevent the cables from coming
into contact with each other.
Terminal block cover
Power terminal block
on the input side
3-2 Disassembly and Reassembly (cont.)
3-2-3 Disconnecting the Power Supply (cont.)
To Next Page
Loading...
