Samsung CLX-9250ND - Page 287

4.Servi
c
• Diagnostics > Adjustment > Finisher Ad
j
ust
m
Purpose To correct hole punching positi
o
Operation
Procedure
1. Choose one item from the
• Punch Hole DOF Position –
•
Punch Hole STS Position
S
•
Punch
Hole
STS
Position
–
S
position
2. Select one item and press t
h
3. Change the adjustment val
u
to lead edge, while - value
4. Press the “OK” button to ap
Verification Print out with punch hole and c
h
Specification
DOF Position Unit: mm, Scale:
0
STS Position Unit: mm, Scale:
0
Reference N/A
•
Diagnostics >
Adjustment
>
Finisher Adjustm
•
Diagnostics
>
Adjustment
>
Finisher
Adjustm
Purpose To correct stapling position.
Operation
Procedure
1. Choose one item from th
e
• Staple STS Position (ⓐ)
• Front Dual Staple DOF Posi
• Rear Dual Sta
p
le DOF Posi
t
p
2. Select one item and press
t
3. Change the adjustment val
u
to lead edge or rear positio
n
front position.
4. Press the “OK” button to a
p
Verification Print out with stapling and che
c
Specification
Staple STS Position Unit: mm S
Specification
Staple
STS
Position
Unit:
mm
.
S
DOF Position Unit: mm, Scale:
STS Position Unit: mm, Scale:
0
Reference
R
Lead-Edge
F
Service Manual
CLX-9250/9350 series
4-
3
c
e Mode
m
ent > Punch Hole Position
o
n. Only available when punch kit is installed.
table. There are two items to choose.
Direction of feeding position
Side to side position That is perpendicular to DOF
Side
to
side
position
.
That
is
perpendicular
to
DOF
h
e edit button.
u
e with arrow button. + value moves the position
moves the position to trail edge.
ply the new value to the system.
h
eck the punch hole position is located as adjusted.
0
.1, Min/Max: ±50mm
0
.1, Min/Max: ±50mm
ment > Staple Position
ment
>
Staple
Position
e
table. There are three items to choose.
tion (
ⓑ)
t
ion
(
ⓒ
)
(
)
t
he edit button.
u
e with arrow button. + value moves the position
n
, while - value moves the position to trail edge or
p
ply the new value to the system.
c
k the stapling position is located as adjusted.
Scale: 0 1 Min/Max:
±
50mm
Scale:
0
.
1
,
Min/Max:
±
50mm
0.1, Min/Max: ±50mm
0
.1, Min/Max: ±50mm
ⓒ
Finisher
R
ear
Front Cover
ⓐ
ⓑ
Paper Trail-Edge
ront
SAMSUNG ELECTRONICS
3
8