Installer reference guide / Mono tank integrated type 47
Moving the indoor unit
• Be sure that the moving route is safe by anticipating the weight of the indoor unit in advance.
Moving the Indoor unit with a forklift
• Insert the fork into the wooden pallet at the bottom of the indoor unit carefully. Be careful that the fork does not
damage the indoor unit.
• When moving the Indoor unit, be careful not to damage the indoor unit by impact. Do not remove the packaging until
the indoor unit reaches the final installation location.
• When adjusting the exact location of the Indoor unit, use the handles.
- A minimum of two people should lift the unit by the handles. (Do not grasp the pipe)
• Remove all handle brackets and the wooden pallet when the unit is in the final installation location.
To Next Page
Loading...
