7. Electrical installation
Installer reference guide / Mono tank integrated type 83
7.2 Outdoor unit's wiring
AE080/120/140BXYD**
1 Open the switch side cover. See "to open the outdoor".
11
22
2 Insert the cables at the rear of the unit, and route them through the factory mounted cable sleeves into the switch box.
AE050RXYDEG
1 Unscrew and remove the one screw on the ASSY cover control.
(Use '+' type screw driver)
2 Insert the cables at the rear of the unit, and route them through the factory mounted cable sleeves into the switch box.