Samsung FP-T5894W - VCR and Camcorder Connections; Connecting a VCR and Camcorder

Connecting a VCR
Front Panel of Wireless
Home AV Center
~ 2 S-Video cable
~ (Not supplied)
Incoming
Cable or
Antenna
D
Connect a Video cable or S-Video
cable between the AV IN 1 [VIDEO]
or [S-VIDEO] (or AV IN 2 [VIDEO]
or [S-VIDEO]) jack on the Wireless
Home AV Center and the VIDEO
OUT or S-VIDEO OUT jack on the
VCR.
iii Connect Audio cables between the
~ AV IN 1 [R-AUDIO-L] (or AV IN 2
[R-AUDIO-L]) jacks on the Wireless
Home AV Center and the AUDIO
OUT jacks on the VCR.
A Press the SOURCE button on the
W remote control until you see the VCR
signal (see "Viewing an External
Signal Source" on page 13).
>- When connecting a VCR match the
color of the connection terminal to the
cable.
Front Panel of Wireless Home AV Center
D
Locate the AN output jacks on the
camcorder.
iii Connect a Video cable or S-Video
~ cable between the AV IN 1 [VIDEO],
AV IN 2 [VIDEO] or S-VIDEO jack
on the Wireless Home AV Center
and the VIDEO OUT or
S-VIDEO OUT jack on the
Camcorder.
iii Connect Audio cables between the
W AV IN 1 [R-AUDIO-L] (or AV IN 2
[R-AUDIO-L]) jacks on the Wireless
Home AV Center and the AUDIO
OUT jacks on the Camcorder.
4
Press the SOURCE button on the
remote control until you see the
Camcorder signal (see "Viewing an
External Signal Source" on page 13).
>- When connecting a Camcorder, match
the color of the connection terminal to
the cable
Camcorder
Output Jacks
~ 2 S-Video cable
~ (Not supplied)
Camcorder
r-""""-----,
.'\olO ,lUJIO
, "
ceo
Connecting a Camcorder
English" 8