Samsung FP-T5894W - Page 91

Using the WISELINK Function
This function enables you to view and listen to photo (BASELINE. JPEG) and audio files (MP3) saved on a USB Mass Storage Class
device.
Press the power button on the remote control or front
panel.
Insert a USB device containing JPEG and/or MP3 files
into the WISELINK jack (USB jack) on the front panel of
Wireless Home AV Center
Front Panel of Wireless
Home
AV Center
-··1
USB (Not suppliedl
WISELINK only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device.
Examples of MSC are Thumb drives and Flash Card Readers. It does not support USB HOD and HUB.
• This product supports USB devices that have only 512byte data block size.
• Do not apply excessive force when you insertlejectthe memory card or USB device.
• Do not place the memory card or USB device near a strong electro-magnetic device.
• Do not allow metal substances to come in contact with the terminals on the memory card.
• Do not bend. drop or apply strong shock to memory cards or USB devices.
• Only alphanumeric characters must be used as a folder name or file name (photo. music). A file name with non-alphanumeric
characters is displayed as "???".
• If a filename is too long. the filename is represented as follows: "filename .. +.jpg" or "filename ... +.mp3".
• The file system supports FAT16/32. not NTFS.
• Certain types of USB Digital camera and audio devices may not be compatible with this TV.
• Before inserting your memory card or USB device into the Wireless Home AV Center. please back up your files. SAMSUNG is not
responsible for any data file damage or data loss.
The data files in memory cards might be erased due to electrostatic discharge (EST). loose contact or dust.
• Some memory devices may not be recognized when the Wireless Home AV Center is turned on and switched to WISELINK Mode.
If this occurs. remove and reinstall the memory device in question.
• Directly connect the USB device to the USB jack on your Wireless Home AV Center. Compatibility problems may occur when using
a USB hub.
• We recommended using the sequential JPEG format. If the progressive JPEG mode is used. decoding may fail due to use of too
much memory.
• When the loading (: . .. ) icon is displayed. do not remove the USB device.
• PTP (Picture Transfer Protocol) or MTP (Media Transfer Protocol) is not supported on this Wireless Home AV Center.
• USB devices that require their own driver CDs may not be recognized. (When a USB device is connected to your PC. Windows
searches for an eligible driver for the device. However. if the USB device is not a bulk-only device it cannot be used with the PC.)
• Recommended image resolution for Wiselink is 6 mega pixels.
• If the horizontal resolution of an image is higher than 5000. it cannot be decoded.
• If the vertical resolution of an image is higher than 4000. it cannot be decoded.
Using the Remote Control Button In WISELINK Menu
Button Operations
8('~B
Move the cursor and select an item
.-)
9
Select the currently selected item.
.
Play or pause the Slide Show or MP3 file .
"")
" .,
Return to the previous menu.
l:);
"IT
V· ;
Stop the current function and return to the previous high-level menu.
INFO
\. I
Run various functions from the Photo and Music menus.
,;;, Stop the current slide show or MP3 file.
"'" I"
\ .... / , ... "')
Page Up or Down (file list item)
- F It L USII1[j the WISELINK Function refer Ie pages 64-73 of the Owner s Instructions.
English - 10