Turning the
TV
and Wireless
Home AV Center On and Off
Press the POWER button
on
the remote control.
The TV and Wireless Home
AV
Center will be turned on and
you will be able
to
use their features.
You
can also use the
Power button on the front
of
the
TV
--
If your TV and Wireless Home
AV
Center Isn't turned
on
when the Power button is pressed' Press the TV button
on
the remote
to
check if the TV mode has been chosen.
Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the
CH
A and
CH
V button
to
scan
through the channels. This eliminates the need to change
channels by entering the channel digits. There are three
steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting
channels (manual).
Viewing the Menus
Viewing
the
Menus
and
Displays
Your TV has a simple, easy-to-use menu system that appears
on the screen. This system makes it convenient and fast to
use the TV's features.
The TV also displays the status of many features.
Selecting a broadcast source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that
is
connected
to
the Wireless Home
AV
Center(Le.,
an
air or a
cable system).
Press the MENU button.
Press the A or T button
to
select Channel, then
press the ENTER button.
Press the A or T button to select Antenna, then
press the ENTER button.
o
With the power on, press the MENU button on the
remote control. The main menu will appear at the
bottom of the screen. The
Picture
menu
is
selected.
Press the A or T button, then press the ENTER
button to select
an
item you want in the menu.
Press the
AI
T I
~/~
IENTER button to display,
change, or use the selected items.
Press the ENTER button to enter items in the menu.
On screen menus disappear from the screen
automatically after about two minutes or you can
press the EXIT button
on
the remote control to exit
from the menu.
o
fA
Press the A or T button
to
select
Air
or Cable,
then press the ENTER button.
2
TV
,.
•
---~CtJannel_--
1--_]
Auto
Program
Cable
Channel
List
S9nal
Strength
LNA
On
~-Move
GEnter 6
Retum
RETURN
@
N'O
o
CAPOON
o
Displaying Status Information
Press the INFO button on the remote control.
The TV will display the Picture mode, Sound mode, MTS,
Caption, V-Chip, and Current Time.
- The information Window automatically disappears
after a few seconds, Press the INFO button once
to
manually close the window.
Press the A or T button
to
select
Auto
Program,
then press the ENTER button.
--
All available DTV (Digital TV) and analog channels
are automatically stored
in
memory.
English
-
11
To Next Page
Loading...
