Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search
and store operation.
If the signal is weak or distorted, you may have to fine
tune the channel manually.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press
the ENTER/OK button.
3 Press the ▲ or ▼ button to select Fine Tune, then press
the ENTER/OK button.
4 To obtain a sharp, and clear picture and good sound
quality, press the ◄ or ► button until you reach the
optimal setting. Press the ENTER/OK button.
➢
To reset the fine tuning to 0, select Reset by pressing
the ▲ or ▼ button. Press the ENTER/OK button.
5 Press the EXIT button to exit.
➢
Fine tuned channels that have been saved are
marked with an asterisk “*” on the right-hand side of
the channel number in the channel banner.
Channel
Auto Store
Manual Store
Fine Tune
Signal Strength
LNA : On
Fine Tune
ATV 6
Reset
Return
Save
Move
Adjust
0
Fine Tune
ATV 6*
Reset
Return
Save
Move
Adjust
+3
Fine Tuned
Fine Tune
ATV 6
Return
Enter
Move
0
Reset
To Next Page