S&C TripSaver II Installation, Operation, And Configuration

S&C Instruction Sheet 461-509 11
Follow these steps to secure the communications gateway:
STEP 1. Close the door and use the door latches to secure the enclosure. See Figure 2 on
page 9.
STEP 2. The door latches accept locks with a maximum shackle diameter of ⅜-inches
(9.5 mm).
Securing the
Communications
Gateway
Mounting, Powering Up, and Securing the Communications Gateway

S&C TripSaver II Specifications

General

Brand	S&C
Model	TripSaver II
Category	Industrial Electrical
Language	English