S&C TripSaver II Installation, Operation, And Configuration

S&C Instruction Sheet 461-509 7
Shipping and Handling
Packing
A complete TripSaver II Communications via Gateway
system for a new installation consists of two shipping
containers. They include the following:
• The communications gateway (including radio, if speci-
ed “factory-furnished” at time of order), an optional
battery if specied, and mounting hardware for secur-
ing the box to the pole
• (Optional) An ac power cable
Inspection
Examine the shipment for external evidence of damage as
soon after receipt as possible, preferably before removal
from the carrier’s conveyance. Check the bill of lading to
make sure the listed shipping containers are present.
If there is visible loss and/or damage:
1. Notify the delivering carrier immediately.
2. Ask for a carrier inspection.
3. Note the condition of shipment on all copies of the
delivery receipt.
4. File a claim with the carrier.
If concealed damage is discovered:
1. Notify the delivering carrier within 15 days of receipt of
shipment.
2. Ask for a carrier inspection.
3. File a claim with the carrier.
Also, notify S&C Electric Company in all instances of
loss and/or damage.
Handling
CAUTION
DO NOT drop the communications gateway or subject
any of its parts to undue stress during installation.
Only remove the communications gateway from
the carton when you are ready for installation. The
communications gateway weighs about 25 lbs.
(11.4 kg); follow proper lifting techniques to avoid
minor injury.
Storage
TripSaver II Communications Gateways are shipped
on pallets banded with plastic wrap. This packaging
is designed to protect the communications gateway
from freight damage. This packaging is not suitable for
outdoor storage because it can pool water and damage
the communications gateway. After receipt, TripSaverII
Communications Gateways should be stored indoors
in their shipping packaging. Storing communications
gateways outdoors in the shipping packaging will void
the warranty.
Returning
If for any reason the communications gateway is to be
returned, place it in the original shipping carton to prevent
damage during shipping. If additional shipping cartons
are required, contact the nearest S&C Sales Ofce, S&C
Authorized Distributor, or S&C Headquarters.

S&C TripSaver II Specifications

General

Brand	S&C
Model	TripSaver II
Category	Industrial Electrical
Language	English