6 S&C Instruction Sheet 461-509
Safety Precautions
DANGER
The TripSaver II Communications via Gateway system connects to a
120/240-Vac source. Failure to observe these precautions will result in serious
personal injury or death.
Some of these precautions may differ from your company’s operating procedures
and rules. Where a discrepancy exists, follow your company’s operating procedures
and rules.
1. QUALIFIED PERSONS. Access to a TripSaver II
Communications via Gateway system must be
restricted only to qualified persons. See the “Qualified
Persons” section on page 2.
2. SAFETY PROCEDURES. Always follow safe
operating procedures and rules.
3. PERSONAL PROTECTIVE EQUIPMENT. Always
use suitable protective equipment, such as rubber
gloves, rubber mats, hard hats, safety glasses, and
flash clothing, in accordance with safe operating
procedures and rules.
4. SAFETY LABELS. Do not remove or obscure any of
the “DANGER,” “WARNING,” “CAUTION,” or
“NOTICE” labels. Remove tags ONLY if instructed to
do so.
5. ENERGIZED COMPONENTS. Always consider all
parts live until de-energized, tested, and grounded.
6. MAINTAINING PROPER CLEARANCE. Always
maintain proper clearance from energized
components.
To Next Page
Loading...
Need help?
General
