S&C TripSaver II - DNP3 Master Settings

56 S&C Instruction Sheet 461-509
A TripSaverII recloser and paired communications gateway can be configured for
both Single Unit Operation and Gang Operation functions. See Figure 52.
Figure 52. A Single Unit and Gang operation.
The purpose of the DNP3 Master Settings screen is to update settings for connecting to
the DNP3 master server.
General DNP3 Master Settings
The backhaul communications protocol is rst identied by the selection of TCP, UDP,
or Serial options in the drop-down box. When chosen, the Save button must be clicked.
See Figure 53.
Figure 53. The DNP3 master protocol interface drop-down box.
DNP3 Master Settings
Conguring the Communications Gateway