S&C TripSaver II - Page 41

S&C Instruction Sheet 461-509 41
STEP 5.
When it is 100% done, the communications gateway will go through a verication
process to conrm it was securely signed by S&C Electric Company. See
Figure 30.
Figure 30. The firmware-verification process.
STEP 6. After the le is veried, a notication will appear. Click on the OK button to
dismiss this window. The Upgrade button will become active. See Figure 31.
Figure 31. The dialog box showing the firmware-verification process is complete.
Conguring the Communications Gateway