Santec MPM-210 - Page 33

Multi-Port Optical Power Meter MPM-210
5-11
16. LEV
Description
Set up TIA Gain for CONST1, SWEEP1 measuring
mode.
Refer to the 5-5-6 for the relation between the
gain setting and the input power.
Syntax
LEV<wsp><value1>
Parameters
<value1>: 1, 2, 3, 4, 5
Default
value1: 5
Example
LEV 5
17. LEV?
Description
Check TIA Gain of CONST1, SWEEP1 measuring
mode.

Refertothe5-5-6fortherelationbetweenthe
gainsettingandtheinputpower.
Syntax
LEV?

Response
<value1>
value1: 1, 2, 3, 4, 5
Example
LEV?
Response: 5

18. AVG
Description
Set up Average Time.
Syntax
AVG<wsp><value1>
Parameters
<value1>: 0.01 ~ 10000.00
Unit: ms
Resolution: 0.01(10us)
Default
value1: 5
Example
AVG 5
15. SPE?
Description
Check Wavelength Sweep Speed.
Syntax
SPE?
Response
<value1>
Sweep speed – 0.001 ~ 100
Unit: nm/sec
Example
SPE?
Response: 1