SPA-100 OPERATION MANUAL
52 / 67
Figure 7-2 NI-488.2 Development Support
3. After the installation is finished, the .NET Framework 4.0 development
support, do the following:
(Not required if set at the time of installation)
Control Panel
⇒ "Uninstall a program" in "Programs" (Figure 7-3)
If you right-click ⇒ "National Instruments Sofftware" and click "Uninstall and
Change" from the menu, Figure 7-4 will be displayed. Select "NI-488.2 17.6"
(displayed depending on the installed version) and click the "Change" button.
Figure 7-3 Uninstalling and Changing Programs
To Next Page
Loading...
