110
9. Save tare value Tare soft key
Remove the empty container
10. Measure the initial weight Fill the 1st container
(in this case: 24.52 g) Place filled container
on scale
11. Save initial weight value Softkey Ini.wt
Remove the filled container
12. Measure the 2nd tare weight Place 2nd empty container
on scale
13. Save tare value
Tare soft key
Remove the empty container
14. Measure the initial weight Fill the second container
(in this case: 22.43 g) Place filled container
on scale
15. Save initial weight value Ini.wt soft key
Remove the filled container
16. Measure the third tare weight Place the 3rd empty container
on scale
17. Save tare value
Tare soft key
Remove the empty container
To Next Page
Loading...
Need help?
General