Sartorius Flexsafe Pro - Moving Parts and Magnetic Forces

14 Operating Instructions Flexsafe
®
Pro Mixer Drive Unit
Safety Precautions
2.15 Moving Parts
2.15.1 Motor
If the user of the device or other people nearby come into contact with the
motor during this process: There is a risk of fingers becoming trapped and
crushed between the motor and the Palletank
®
for Mixing.
t Do not reach into the area between the device and the Palletank
®
for
Mixing while the motor is raised.
t Ensure that there are no people in the operating area of the device who
can reach between the motor and Palletank
®
for Mixing.
2.15.2 Alignment Pins
When coupling the device to the Palletank
®
for Mixing, the alignment pins
are raised and connect to the alignment plate of the Palletank
®
for Mixing. If
the user or other people nearby come into contact with the alignment pins
or the alignment plate during this process: There is a risk of fingers
becoming trapped and crushed between the alignment pins and the
alignment plate.
t Do not reach into the area between the device and the Palletank
®
for
Mixing while the alignment pins are raised.
t Ensure that there are no people in the operating area of the device who
can reach between the alignment pins and alignment plate.
2.15.3 Guide Rollers
As the device is being inserted or removed, the device’s guide rollers glide
over the guide rails of the Palletank
®
for Mixing. If the user of the device or
other people nearby come into contact with the guide rollers: There is a risk
of fingers becoming trapped and crushed between the guide rollers and the
guide rails.
t When inserting or removing the device on the Palletank
®
for Mixing, do
not reach into the area between the guide rollers and guide rails of the
Palletank
®
for Mixing.
t Ensure that there are no people in the operating area of the device who
can reach between the guide rollers and guide rails.