Operating Instructions Flexsafe
®
Pro Mixer Drive Unit 35
System Settings
7.3.3 Creating Users
Procedure
t In the list of saved users, hold down the [List down] button until the end
of the list is reached.
t Double click in the empty row.
y A new entry is created.
7.3.4 Changing Users
The users classed as “supervisor” and “Operator” come pre-installed with
standard passwords. We recommend that you change these standard
passwords:
− Standard supervisor password: 1111
− Standard operator password: 0000
Procedure
t If a saved user needs to be changed, e.g. the password for the user:
t Click on the corresponding user entry, e.g. on the [Password] table
cell.
y The table cell is selected.
t Press the entry again.
y The keypad appears.
t Change the value in the entry field (for setting options, see Chapter
“7.6.3 Parameters in the “Settings” | “Access level” Menu”,
page 38).
t If the user group for an entry needs to be changed:
t Press the [Group] table cell for the user.
t The [Group] table cell is marked and an arrow symbol appears in the
table cell.
t Click on the arrow symbol.
y A drop-down list is opened.
t Select the desired user group. To do this, click on the user group
button, e.g. the [Operator] button.
t To close the drop-down list: Click on the arrow symbol.
Access level: Admin
DD.MM.YYYY
HH:MM:SS
Settings
Admin
User Password Group Logoff time
Operator
supervisor
PLC User
Administrator group
Users
Group
Unberechtigt
User administration
Settings
Admin
User Password Group
Operator
supervisor
PLC User
Administrator gr
Users
Supervisor
Unauthorized
User administration
Group
Admin
supervisor
Operator
To Next Page
Loading...
