Sartorius Flexsafe Pro - Device Description; Device Overview and Components

16 Operating Instructions Flexsafe
®
Pro Mixer Drive Unit
Device Description
3 Device Description
3.1 Device Overview
6
4
3
5
1 21
10
9
8
7
Fig. 1: Flexsafe
®
Pro Mixer Drive unit (viewed from above)
Pos. Designation Description
1 Guide roller Used to insert and remove the device underneath the Palletank
®
for
Mixing. Glides across the Palletank
®
for mixing guide rails.
2 End piece Used to ensure that the device is correctly positioned on the guide rails
of the Palletank
®
for Mixing.
3 Motor
4 Castors with locking brakes Used to steer the device. Can pivot.
5 Castors without locking brakes
6 Manufacturer's ID label
7 Handle Used to move and lift the device.
8 Stylus Used to operate the operating display, e.g. when wearing gloves.
9 Operating display Used to operate the device and control the mixing process.
10 Emergency shut-off switch