42 Operating Instructions Flexsafe
®
Pro Mixer Drive Unit
Operation
8.6 Coupling the Device to the Palletank
®
for
Mixing and Impeller
To couple the device to the Palletank
®
for mixing and the impeller: The
motor, the alignment pins and the distance sensor must be raised.
Lift up the motor by pressing the arrow up
button. Press the button until the motor is
positioned correctly
Couple motor
Manual mixing
Access level: Admin
DD.MM.YYYY
HH:MM:SS
Access level: Admin
DD.MM.YYYY
HH:MM:SS
Manual mixing
Couple motor
Lift up the motor by pressing the arrow up
button. Press the button until the motor is
positioned correctly
1
2
3
Fig. 11: Display [Couple motor] (motor in lower and upper position, example)
Pos. Designation Description
1 Direction of movement Displays the direction of movement of the motor.
2 [Raise] button If the [Raise] button is held down: The motor and the associated
components are raised.
3 Positioning bar Indicates the position of the motor:
− Positioning bar colored black: Current position of the motor.
− Positioning bar up: The motor is being raised.
− Positioning bar in the middle: The motor is currently being raised or
lowered.
− Positioning bar down: The motor is being lowered.
Requirements
The “Couple motor” display appears in the user guide.
WARNING
Risk of crushing due to moving parts!
When coupling the device, the moving parts rise.
t Do not reach into the area between the device and the Palletank
®
for
Mixing while the moving parts are rising.
t Ensure that there are no people in the operating area of the device who
can reach between the moving parts and Palletank
®
for Mixing.
To Next Page
Loading...
