Operating Instructions Flexsafe
®
Pro Mixer Drive Unit 27
Operating Concept
4.10 Navigating the Menus
t To access a menu: Press the button for the menu, e.g. the [Manual
mixing] button (1).
t The first display in the process step routine or the submenu is shown.
t To go to the next display in a process step routine: Press the [Next
display] (1) button.
y The next display for the process step routine appears.
t If a value needs to be entered in an entry field or changed:
t Press the entry field (1).
y The keypad appears.
t Enter the desired value using the keypad.
t Press the [Enter] button.
y The keypad closes.
y The entered value is displayed in the entry field.
t If a value needs to be entered in an entry field via the interface elements,
e.g. the mixing speed: Hold down the button until the desired value is
shown, e.g. hold down the [Value higher] or [Value lower] button until
the desired value is displayed.
t To cancel a process and return to the main menu: Press the [Home] or
[Close] button.
t To log out of the device: Press the [Logout] button in the status bar.
y The [Logout] button is hidden.
Access level: Admin
DD.MM.YYYY HH:MM:SS
Mixing with recipe
Remote mixing
Manual mixing
1
1
Access level: Operator
DD.MM.YYYY
HH:MM:SS
Manual mixing
Fill bag
Fill bag to minimum mixing volume
1
Access level: Admin
DD.MM.YYYY
HH:MM:SS
Manual mixing
Actual speed [rpm]
Time [hh:mm:ss]
Set parameters
Speed
Duration
1
Access level: Admin
DD.MM.YYYY
HH:MM:SS
Manual mixing
Actual speed [rpm]
Time [hh:mm:ss]
Set parameters
Speed
Duration
To Next Page
Loading...
