Operating Instructions Flexsafe
®
Pro Mixer Drive Unit 5
Contents
8 Operation...........................................................................39
8.1 Setting Up Process Data Acquisition for USB Mass Storage .....................39
8.2 Selecting the Operating Mode...................................................39
8.3 Selecting the Recipe (Only “Mixing with recipe” Operating Mode) . . . . . . . . . . . . . . 39
8.4 Installing the Mixing Bag in the Palletank
®
for Mixing............................40
8.5 Inserting the Device under the Palletank
®
for Mixing ............................40
8.6 Coupling the Device to the Palletank
®
for Mixing and Impeller ..................42
8.7 Filling the Mixing Bag ............................................................43
8.8 Set the Mixing Speed and Duration (Only “Manual mixing” or “Remote mixing”
Operating Mode) ................................................................43
8.9 Carrying Out the Mixing Process ................................................44
8.9.1 Starting the Mixing Process...............................................44
8.9.2 Pausing, Stopping, or Canceling the Mixing Process .....................44
8.10 Processing Messages ............................................................44
8.11 Viewing Recorded Messages ....................................................45
8.12 Ending the Mixing Process.......................................................45
8.12.1 Decoupling the Device from the Impeller and Palletank
®
for Mixing .....45
8.12.2 Emptying and Removing the Mixing Bag ................................46
8.12.3 Removing the Device from the Palletank
®
for Mixing.....................46
8.13 Ending the Process Data Acquisition............................................. 47
9 Cleaning and Maintenance .........................................................48
9.1 Cleaning Device Surfaces........................................................48
9.2 Maintenance Schedule ..........................................................48
9.3 Restarting the System............................................................48
10 Malfunctions........................................................................49
10.3 Faults when Operating the Device...............................................52
10.4 Leaked Liquids ...................................................................52
10.5 Checking the Position of the Mixing Bag and Impeller...........................52
10.6 Checking the Coupling with the Mixing Bag and Impeller .......................52
11 Decommissioning...................................................................53
11.1 Decommissioning the Device ....................................................53
12 Transport............................................................................54
12.1 Installing the Transport Lock .....................................................54
13 Storage and Shipping ...............................................................55
13.1 Storage...........................................................................55
13.2 Returning Devices and Parts .....................................................55
14 Disposal.............................................................................56
14.1 Information on Decontamination ................................................56
14.2 Disposing of the Device and Parts ...............................................56
14.2.1 Information on Disposal ..................................................56
14.2.2 Disposal...................................................................56
To Next Page
Loading...
Need help?
General
