Sartorius MA100 User Manual

Interface Port
You may choose to connect a different
peripheral device, such as one of the
following, to the interface port instead
of or in addition to the internal printer:
– external printer
– status indicators with digital input ports
– process logic controller with digital
input/output port
– a computer (PC) with a communications
port
The moisture analyzer can be monitored
and remote-controlled via the interface
port.
For a detailed description, see the
section on “Data Output Functions”
in the chapter entitled “Operating
the Moisture Analyzer.”
Error Codes
If you press a key that has no function,
or which is blocked at a certain point
in an application program, this error is
indicated as follows:
– a double-beep is sounded as
an acoustic signal if the key has
no function
– invalid input is indicated by an
error message
– incorrect operation is indicated by an
error code or error message
The response to an operator error is
identical for all operating modes.
See the chapter entitled “Error Codes”
for a detailed description.
Saving Data
Storing Parameter Settings
The parameter settings in the Setup
menu and for drying programs are
active when you switch on the moisture
analyzer. The parameter settings,
selected with the
Mode soft key dur-
ing an analysis, are not saved (excep-
tion: limits for the control function).
In addition, the factory settings can be
restored.
Saving Parameter Settings
You can assign passwords in order to
block access to:
– user-configured drying programs
– setting mode for device parameters
– printout configuration
If no password has been assigned,
anyone can access drying programs,
“SETUP: Device parameters” and
“Printout configuration” without
entering a password.
If you assign a password and then
forget what the word is, you can use
the General Password (see Appendix)
to access these menus.
12

Sartorius MA100 Specifications

General

Brand	Sartorius
Model	MA100
Category	Measuring Instruments
Language	English