Example 1: Standard Drying with Fully Automatic Shutoff Mode
The moisture content of 2 g of corn starch is to be analyzed. The sample can scorch if overheated, but it is not overly heat sensitive.
The analysis is to be ended automatically as soon as a constant weight is reached.
Settings (factory setting):
Program number: 1
Program name: corn starch
Final temperature: 130°C
End of analysis: automatic (different from the factory settings)
Step Key (or instruction) Display/Printout
1. Turn on the moisture analyzer e key Sartorius logo is displayed
Self-test runs
2. Enter the parameters for
Prog. soft key
drying program
3. Select program “1” O soft key
4. Select “Program name” O soft key
5. Enter the program name a 0 ... 9 keys
(e.g,. corn starch)
ABCDEF ... soft keys
A B C D ... soft keys
6. Confirm your input and exit a key
the program l soft key
o soft key
7. Select the heating program q soft key
O soft key
37
To Next Page
Loading...
