Specifications for Models without EC type-approval certificate
Model MA100 MA50
Dryer functions:
Heating element Ceramic IR heater or round halogen lamp
Temperature range 30 – 230°C 30 – 230°C
86 – 392°F 86 – 392°F
Temperature increments adjustable in 1°C increments
Temperature adjustment with YTM03MA temperature adjustment set
Weighing Functions:
Weighing capacity 100 g 50 g
Readability 1mg/0.1 mg, 1 mg, 0.01% moisture content
0.01%/0.001 % moisture content
Repeatability, average (%) sample weight =1g: 0.1%, sample weight =1g: 0.2%
sample weight =5g: 0.02% sample weight =5g: 0.05%
External calibration weight 50 g (E2) 50 g (F1)
(of at least accuracy class...)
Sample pan dimensions Ø 90 mm Ø 90 mm
Drying parameters:
Drying programs standard, quick, standard, quick
gentle, 3 temperature phases
Drying time 6 sec. to 999 min
Number of programs 30 5
Shutoff criteria Fully automatic, semi-autom., Fully automatic, semi autom.,
asap, time (3x 999 min.), asap, time (1x 999 min.),
manual manual
Display for analysis results Moisture (calculated value), Moisture, dry weight, RATIO,
dry weight, RATIO, weight loss,
weight loss, residual weight (g or g/kg)
residual weight (g or g/kg)
Analyzer (hardware):
Dimensions (L x W x H) 350 x 453 x 156 mm
Net weight, approx. 8 kg 6.5 kg
Voltage 230 V or 115 V selectable by replacing
the heating unit, –15% ... + 10%
Frequency 48 – 60 Hz
Fuses 2 (neutral conductor/phase), 6.3 AT, 5 x 20 mm
Operating temperature range +10 ... +30°C (50°F – 86°F)
Power consumption 700 VA max.
Built-in interface RS-232C
Format: 7 or 8 bit ASCII, 1 start bit, 1 or 2 stop bits
Parity: Space, odd or even
Transmission rates: 150 to 19,200 baud
Handshake: Software or hardware
Digital input: 1, adjustable function
Digital outputs: 4, operating state of analysis
72
Overview
To Next Page
Loading...
