Displaying Analysis Data
Overview
Moisture Info Display intermediate and final results
analyzer is (Analysis information) for phase drying
on
(e key) Prog. see page 30,
(Drying programs) “Setting the Drying
Parameters”
Stat. Display statistics
(MA100 only: statistics)
ID ID1 20 characters
(Identification codes; ID2 20 characters
IDs) ID3 20 characters
ID4 20 characters
Mode Weight resolution ο 1 mg
for analysis 0.1 mg
Display mode ο moisture (%L) 1 decimal place
ο 2 decimal places
3 decimal places
Dry weight (%R) 1 decimal place
ο 2 decimal places
3 decimal places
Ratio (%LR) 1 decimal place
ο 2 decimal places
3 decimal places
Weight loss (mg)
Residue (g)
Residue (g/kg)
Intermediate ο Off
results printout On
Internal printer ο Off
On
Limits for Lower limit 0.00 0.00 to 99.99
ο = Factory setting control function Upper limit 100.00 0.01 to 100.00
35
Features:
Enter, change and delete function for all
4 IDs (
ID soft key)
Enter the first identification code (ID1)
directly using the numeric keys
Maximum of 20 characters for every
generic ID name
Maximum of 20 characters for every
specific ID name
Each ID is printed once in any place on
the printout.
The generic name printout is left-justified;
the specific name printout, right-justified.
A specific name is printed in the next line if
the generic and specific names exceed the
character line limit. The identification line
is skipped if generic and specific names
contain no characters at all.
Entering Specific ID Names
--------------------
COMPANY: DAIRY FARM
CITY: BERLIN
LOT:
POWDERED MILK NO 1C5
NAME: JOHN MEYER
--------------------
ID line printout
Werkseinstellung
Werkseinstellung
Identification Codes (IDs)
You can use codes to identify current
analyses, and can enter 4 IDs for each
analysis.
Every ID consists of a generic name and
a specific name, both of which are user-
definable. The generic ID name (left part)
is normally a proper name and can be
entered during the respective drying pro-
gram (such as the company, city, etc.).
The specific ID names are entered for the
current analysis and exist only once.
To Next Page
Loading...
