Sartorius MA100 User Manual

Setting the Device Parameters
(DEVICE)
Purpose
Device configuration, i.e., to meet
individual requirements by selecting
predefined menu parameters in the
Setup menu. You can block access to
the menu by assigning a password.
Features
The device parameters are combined
in the following groups:
– Password to the Setup menu
– User ID
– Weighing parameters
– Interface
– Internal printer (option)
– Keypad
– Display
– Clock
– Extra functions
– Factory settings
You can view, enter or change the
following parameters:
Password
– Password for access to the SETUP
menu: “Device parameters,” “Printout
configuration” and “Drying programs”
(8 characters max.)
User ID
– ID codes:
User ID (20 characters max.)
Weighing parameters
– Adjustment to the ambient conditions
– Weight set number for
calibration/adjustment:
W ID (weight ID; 14 characters max.)
– Exact calibration weight value for
calibration/adjustment of the analyzer,
such as for adjustment according to
a DKD certificate (see the section on
“Calibration/Adjustment” in the chapter
entitled “Operating the Moisture
Analyzer”)
Interface
– SBI operating mode
Simple record of analysis results for PC
or external printer, factory setting for
YDP03-OCE printers
Format: baud rate, number of data bits,
parity, stop bits, handshake
– xBPI operating mode
Function-oriented interface with clear
data transmission
Network address: enter a number from
0 to 31; factory setting: 0
– Sartonet via RS-485 interface
Network address: enter a number from
0 to 31; factory setting: 1
Keys
– CF function: delete entire input
or last character
– Block key functions
Display
– Background
– Contrast/angle of the display (enter a
number from 0 to 4; factory setting: 2)
Clock
– Time (hh.mm.ss; hh can be entered
without a preceding zero)
– Date (dd.mm.yy or mm.dd.yy when
you select “English with U.S. date/time”
as the language”)
Extra Functions
– Acoustic signal on or off
– Functions for external universal remote
control switch, extra keyboard or bar
code scanner
Factory Settings
Parameters: The factory-set configu-
rations are identified by an “o” in the
list starting on page 18.
Preparation
Display existing “Device parameters”
§ Select the Setup menu:
Press the s key
> SETUP is displayed:
§ Select “Device parameters”:
Press the q and O soft keys
If no password has been assigned,
anyone can access “SETUP: Device
parameters” and “Printout configura-
tion” without entering a password
If you have already assigned
a password:
> The password prompt is displayed
$ If access is blocked by a password:
enter the password using the alpha-
numeric keys
$ If the last character of the password is a
letter: conclude input by pressing a
§ Confirm the password and display
“Device parameter”:
Press the l soft key
> Device parameters are displayed:
14

Sartorius MA100 Specifications

General

Brand	Sartorius
Model	MA100
Category	Measuring Instruments
Language	English