Picus
®
2 Operating Instructions 49
Trouble
10.2 Resetting to Defaults
When resetting to defaults, the stored settings and the other information
contained in the memory are not changed.
Requirements
— The device is not connected to the charger.
— The device is not connected to the USB cable.
Procedure
t Press and hold the On | Off button and the right softkey button simulta-
neously for a few seconds.
y The device switches itself off.
t To switch on: press the On | Off button.
y The device is reset to the defaults.
To Next Page
Loading...
Need help?
General
