SATO CL408 - Maxi Code

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-69 PN: 9001096E
MAXI CODE
FUNCTION
Specifies Maxi code of 2D code.
FORMAT
<ESC>BVa, b, c, ddddddddd, eee, fff, n~n
a = Position of Maxicode symbol within set (1 to 8)
b = Total quantity of Maxicode symbols within set (1 to 8)
c=Mode
2: for Mode 2 carrier message for domestic UPS shipments
3: for Mode 3 carrier message for international UPS shipments
4: standard symbol
6: for reader
d = Zip Code (9 digit postal code)
e = Country Code (001 to 999)
f = Service Class (001 to 999)
n = Data determined by <ESC>
Place anywhere after <ESC>V but before <ESC>Q.
EXAMPLE
<ESC>A<ESC>V0100<ESC>H0100
<ESC>BV1,1,2,123456789,840,001,[)<RS>01<GS>961Z01547089<GS>UPSN
<GS>056872<GS>348<GS>99999999<GS>001/005
<GS>029<GS>N<GS><GS>LENEXA<GS>KS<RS><EOT>
<ESC>Q1
<ESC>Z
OUTPUT
(4-43)
NOTES
For mode 2, specify up to 9 numeric digits; and for mode 3, specify fixed 6 digits (alphanumeric - use
English capital letters). “00H” cannot be specified for print data.
Refer to Appendix: Reference Table 27 for additional information.