SATO CL408 - Tear-Off Correction

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-91 PN: 9001096E
TEAR-OFF CORRECTION
FUNCTION
Corrects tear-off value.
FORMAT
<ESC>CBabb
a=
Increment or Decrement
+: Increment
- : Decrement
bb =
Distance to move (mm) -5 to 98
EXAMPLE
<ESC>A
<ESC>CB+19
<ESC>Z
OUTPUT
NOTES
1. If the command <ESC>CB-02 is executed after <ESC>CB+06, the tear-off position becomes -2 mm.
2. Maximum setting value is 98 mm. Values larger than that will be indicated as 98 mm.
3. Setting range is from -5 mm to 98 mm.
4. Setting value is effective after powering off the printer.
5. Current setting value will be printed in the TearOffset section of factory test print (2nd label).