SATO CL408 - Memory Area Enlarge Specification

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-98 PN: 9001096E
MEMORY AREA ENLARGE SPECIFICATION
FUNCTION
To specify enlargement of Print Area (vertical direction).
FORMAT
<ESC>EXa
a = Slot Number Specification =
0: Internal Memory
Place immediately preceding the data to be encoded.
EXAMPLE
<ESC>A
<ESC>EX0
<ESC>ESCZ
OUTPUT
The data inside parentheses ( ) is the value converted from dots to mm. The value was rounded off to the whole number (in order to
avoid the use of the decimal point).
NOTES
1. It cannot be used together with Internal Memory Register Data (Form Overlay Register,
Foreign Character Register)
2. When you specify slot at Memory Area Enlarge Specification <ESC>EX, specify it first
after printer power is switched On.
3. Standard Print Area Specification <ESC>AR and Enlargement Print Area <ESC>AX
become invalid.
4. If the number 1 is specified as parameter, print area will be enlarged at the internal
memory.
Model
Print Resolution
(Head Density)
Standard
Standard Print Area
<AR>
Enlargement Print Area
<AX>
Standard Enlargement
<EX>0
CL408e
M-8400RVe
CL608e
M-5900RVe
203dpi
（
8dot/mm
）
1424dot
(178mm)
1424dot
(178mm)
2848dot
(356mm)
9999dot
(1249mm)
CL412e
CL612e
305dpi
（
12dot/mm
）
2136dot
(178mm)
2136dot
(178mm)
4272dot
(356mm)
9999dot
(833mm)
ipd503 e01-M
（
12dot/mm
）
3600dot
(300mm)
3600dot
(300mm)
4188dot
(349mm)
5040dot
(420mm)
ipd302 e004LX
（
8dot/mm
）
2400dot
（
300mm
）
9999dot
(1249mm)
ipd503 e014LX
（
12dot/mm
）
2880dot
(240mm)
9999dot
(833mm)
M-8485Se
M-8460Se
M-8459Se
203dpi
(8dot/mm)
1424dot
(178mm)
1424dot
(178mm)
2848dot
(356mm)
9999dot
(1249mm)
M-8490Se 305dpi
（
12dot/mm
）
2136dot
(178mm)
2136dot
(178mm)
4272dot
(356mm)
9999dot
(833mm)
M-84Pro-2 203dpi
(8dot/mm)
1424dot
(178mm)
1424dot
(178mm)
2848dot
(356mm)
9999dot
(1249mm)
M-84Pro-3 305dpi
（
12dot/mm
）
2136dot
(178mm)
2136dot
(178mm)
4272dot
(356mm)
9999dot
(833mm)
M-84Pro-6 609dpi
(24dot/mm)
4272dot
(178mm)
4272dot
(178mm)
8544dot
(356mm)