Unit 4: Standard Command Codes
E/Pro Programming Reference
4-118 PN: 9001096E
ZERO SLASH
FUNCTION
To allow printing of numeric zeroes with a slash.
FORMAT
<ESC>LHa
a = 0: Print zeroes without slash
1: Print zeroes with slash
Place in a separate data stream before any label data is transmitted.
EXAMPLE
<ESC>A
<ESC>LH0
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
This command can also be set using the LCD panel. The last setting received, whether it is via this
command or manually input via the LCD panel will be active.
To Next Page
Loading...
