Unit 4: Standard Command Codes
E/Pro Programming Reference
4-121 PN: 9001096E
FORCED TEAR OFF
FUNCTION
Executes Tear off compulsory.
FORMAT
<ESC>TK
EXAMPLE
<ESC>A
<ESC>TK
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
1. This command can be specified only in Tear off mode.
2. With this command, the printer executes Tear off motion without waiting the time set by command
<ESC>TW. If the next data is received before Tear off motion, Tear off is executed compulsory.
3. This command can not be used in combination with other commands.
Do not send this command in a row.
Tip:
This command can be used to save the time set by command <ESC>TW, if it is certain that there is no
following item.
To Next Page
Loading...
