SATO CL408 - Eject and Cut

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-110 PN: 9001096E
EJECT AND CUT
FUNCTION
Cuts any printed labels that remain in the printer..
FORMAT
<ESC>NC (EJ)
EXAMPLE
<ESC>A
<ESC>NC (EJ)
<ESC>Z
OUTPUT
NOTES
1. Valid only for cutter models.
2. This command is used to cut the last label remaining in the printer.
3. This command should be used by differentiating between Start code <ESC>A and Stop code
<ESC>Z.
4. This command <ESC>NC
(EJ) may not be used in combination with other commands.
5. This command <ESC>NC
(EJ) is valid while the printer is not working after having printed and
having finished the cutting operation.
Tip:
This command is used to cut remaining label in printer after the commands <ESC>CT0 or <ESC>~0 is
executed.
(1)
(3)
(4)
(5)
(2)
(1) Label stop position
A: Printed
B: Not printed
C: Not printed
D: Not printed
(2) Command received
(3) Label is fed to the cut position.
(4) Label is cut off.
(5) Label is back fed to the head position.
Feed direction
A B C
Cut position
Print head
A
B C
D
B C D
B C D