Unit 4: Standard Command Codes
E/Pro Programming Reference
4-133 PN: 9001096E
DEFAULT GATEWAY
FUNCTION
Specifies default gateway.
FORMAT
<ESC>W3
a~a = Default gateway = 12 digits fixed
Place this command between <ESC>A start code and <ESC>Z stop code..
EXAMPLE
<ESC>A
<ESC>W3128220001001
<ESC>Z
OUTPUT
This command does not result in printer output.
Setting can be printed on the factory test print.
NOTES
You cannot use this command in combination with other commands.
The set parameter will become valid after rebooting.
Default setting of Default gateway is as follows:
Default gateway: 000000000000
To Next Page
Loading...
