SATO CL408 - Reverse Image; Command Structure; Special Notes

Unit 4: Standard Command Codes
E/Pro Programming Reference
4-23 PN: 9001096E
VARIABLE DATA SPECIFICATION
FUNCTION
Specifies variable data for small labels. Only applicable to the M10e printer.
FORMAT
<ESC>_Daa,nn...n
a = Field number (01 to 99)
n=Variable data
Place after <ESC>H and <ESC>V but before <ESC>Q.
EXAMPLE
<ESC>A
<ESC>A106363060<ESC>600,1020,0,0
<ESC>_F
<ESC>_N01,04<ESC>V100<ESC>H200<ESC>L0202<ESC>XMABCD
<ESC>_N02,07<ESC>V200<ESC>H200<ESC>L0202<ESC>B103200*11111*
<ESC>_N03,02<ESC>V100<ESC>H400<ESC>L0202<ESC>XM99
<ESC>_D01,AAAA<ESC>_D02,*22222*<ESC>_D03,22<ESC>_Q1
<ESC>_D01,BBBB<ESC>_D02,*33333*<ESC>_D03,33<ESC>_Q2
<ESC>_D02,*44444*<ESC>_D03,44<ESC>_Q4
<ESC>Z
OUTPUT
(4-15)
NOTES
If Variable Data Specification <ESC>_D is omitted, the content specified under Format Specification
<ESC>_N will be printed. However, if variable data is specified from Variable Data Specification
<ESC>_D, it will continue to that content and printing.