Unit 4: Standard Command Codes
E/Pro Programming Reference
4-82 PN: 9001096E
PRINT DARKNESS
FUNCTION
To specify a new print darkness setting through software control for unique media and ribbon
combinations.
FORMAT
<ESC>#Ea
a = Print Darkness Value
Must be placed immediately after <ESC>A and immediately before <ESC>Z in its own
separate data stream.
Refer to the product manual for specific print speed increments.
EXAMPLE
<ESC>A
<ESC>#E2
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
This becomes the new setting in the printer configuration for all subsequent print jobs unless changed.
The setting is stored in non-volatile memory and is not affected by cycling power. The lightest setting is
the smallest value and the darkest setting is the largest value.
To Next Page
Loading...
