Unit 4: Standard Command Codes
E/Pro Programming Reference
4-135 PN: 9001096E
LABEL SPECIFICATION
FUNCTION
Temporarily specifies label specification. Only applicable to the CT400/410 printers.
FORMAT
<ESC>YEa
a = Label type
0: Adhesive label
1: Tag
Place immediately following the <ESC>A command.
EXAMPLE
<ESC>A
<ESC>YE0
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
To change the setting value that is recorded in the printer, specify <ESC>PG or <ESC>PC commands.
To Next Page
Loading...
