Unit 5: Optional Command Codes
E/Pro Programming Reference
5-6 PN: 9001096E
CARD FORMAT
FUNCTION
Specifies the format (initialization) of memory card.
FORMAT
<ESC>BJFa
a = User ID (up to 8 bytes of alphanumerics and symbols)
Place anywhere between <ESC>A and <ESC>Z.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>BJFsatocard
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
This command is not valid without an optional memory card.
Specify the Card Slot for Use <CC> prior to using this command.
This command is for formatting a memory card and cannot be used in combination with other
commands. If formatting the card by accident, registered data will be erased.
To Next Page
Loading...
