SATO CL408 - Page 216

Unit 5: Optional Command Codes
E/Pro Programming Reference
5-24 PN: 9001096E
FIELD PRINT SPECIFICATION
FUNCTION
To cal out items which are registered at the Field Register Specification <ESC>/N and then specify the
data.
FORMAT
<ESC>/D,aa,n...n
a = Field number (01 to 99)
n=Data
Place following the <ESC>YR command.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>YR,02<ESC>/D,01,TWO FIELDS OF<ESC>/D,02,VARIABLE DATA
<ESC>Q1
<ESC>Z
OUTPUT
(5-10)
NOTES
The print digit number is valid at the specified range of <ESC>/N.
If the digit number specified at <ESC>/D is much more than that from <ESC>/N, the specified print digit
is valid for printing.
Use as a apair with the command <ESC>YR.