Unit 3: Code Quick Reference
E/Pro Programming Reference
3-2 PN: 9001096E
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
A Start Code. Begins all print jobs
~Aaaaa Cut, Label. Specifies the quantity of labels to print between each cut. It is independent of the
Quantity command.
aaaa = Quantity of labels between each cut
~aaaa Cut, Job. Cuts labels at a specified interval in a print job. Quantity of labels printed is equal
to the product of the quantity specified x the value of aaaa.
aaaa = Quantity of labels between each cut (0001 to 9999)
~(NULL) Multiple Cut Specification. Cuts a specified quantity of times for a specified quantity of
labels resulting in one or more labels between each cut sequence.
a = Print quantity until cut (0 to 9999)
~B Cut, Last. Cuts any printed labels that remain in the printer.
AOa Auto Online. Allows the automatic online on power up setting to be enabled or disabled.
a = 0: Powers up in the online mode
1: Powers up in the offline mode
A1aaaabbbb Media Size (dots). Specifies the label size in dots.
aaaa = Label height in dots (0 to Vmax)
bbbb = Label width in dots (0 to Hmax)
A1aabbbccc Media Size (mm). Specifies the label size in millimeters for XL400/410e and TG308e and
TG312e printers.
a = Label Type
0T: Tag Label
0T: Adhesive Label
b = Vertical Dimension in millimeters
025 to 300 Tag (XL400e)
019 to 300 Label (XL400e)
025 to 240 Tag (XL410e)
019 to 240 Label (XL410e)
c = Horizontal Dimension in millimeters
032 to 100 Tag (XL400/410e)
029 to 100 Label (XL400/410e)
& Store Form Overlay. Stores a specified label image in the printer’s volatile form overlay
memory.
AR Normal Print Length. This command resets the printer to the Standard print length (7
inches).
&Raa Form Overlay, Recall. Recalls a label image previously stored in Expanded Memory.
aa = Storage number (00 to 99)
To Next Page
Loading...
