Unit 3: Code Quick Reference
E/Pro Programming Reference
3-16 PN: 9001096E
OB Font type. Specifies the OCR-B font dot matrix.
OL Online. Changes the printer status from offline to online.
Paa Character Pitch. Designates the number of dots between characters.
aa = Number of dots between characters (01 to 99)
(aaaa,bbbb Reverse Image. Reverse image from black to white and vice versa. The units of measure
are dots.
aaaa = Horizontal length in dots of area to be reversed.
bbbb = Vertical height in dots of area to be reversed.
PCaa,bbPCF,a,........z Flash ROM Setup. Sets the default printer configuration in Flash ROM.
a
= Item number setting (F = setting of all items)
b-z
= Sets content
Appendix Reference Table XXXX for CT400/410 printer
Appendix Reference Table XXXX for all other printers
PD Small Label Size Specification. Specifies parameters relative to small label size. Only
applicable to the M10e printer.
a
= Vertical dimension (480 to 3600 dots)
b
= Horizontal dimension (480 to 1600 dots)
c
= Label size (00 to 99 dots)
d
= Multiple cut labels (01 to 99)
%a Rotate, Fixed Base Reference Point.
a = 0: Sets print to normal direction
1: Sets print to 90 degrees counter-clockwise
2: Sets print to 180 degrees rotated (upside down)
3: Sets print to 270 degrees counter-clockwise (90x CW)
PG EEPROM Setup. Sets the default printer configuration in EEPROM.
a-z
= Sets content
Appendix Reference Table 43 for CT400/410 printer
Appendix Reference Table 42 for XL408/410e printers
Appendix Reference Table 41 for M10e printer
Appendix Reference Table 40 for all other printers
PHa Print Method, Thermal/Thermal Transfer. Selects the thermal printing method.
a = 0: Thermal transfer printing
1: Direct thermal printing
PIaaa,bbbbb,cc...c PCX File, Store. Stores a PCX graphic file.
aaa = Storage number (001 to 999)
bbbbb = Number of bytes in the file to be stored
cc...c =
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION
To Next Page
Loading...
